Tecnocoat
TECNOCOAT products are a range of high quality waterproof polyurea coatings produced by subjecting their liquid component to high temperatures and pressure. Their excellent mechanical properties have made them one of the most widely used membranes for construction work involving demanding technical specifications.HIGH STRENGTH POLYUREA MEMBRANE 100% PURE FOR WATERPROOFING AND COATING
The 100% pure polyurea TECNOCOAT P-2049 HR system was developed as a coating suitable for waterproofing, protection and sealing in general, especially in applications where extreme resistance is required. The pure polyurea TECNOCOAT P-2049 HR membrane is made up of two liquid components, isocyanates and amines, which are mixed together using a spray equipment (TC2049 http://spray-equipment.tecnopolgroup.com/), to form an aromatic, continuous, without joints, high density, solid pure polyurea, with high mechanical and excellent chemical resistance qualities.
Cold polyurea membrane for waterproofing and coating
The cold polyurea TECNOCOAT CP-2049 is a two component polyurea, that once applied, forms a continuous, solid, 100% waterproof membrane without joints or overlaps and completely adhered to support. Suitable for waterproofing, protection and sealing in general. Due to its cold and manual application, is ideal too for repair or recoating on top of our polyurea membranes range, once these are already catalyzed.
Highly expandable 100% pure polyurea membrane for waterproofing, with thermal behavior
TECNOCOAT P-2049 EX has developed as a single coating suitable for waterproofing, thermal isolation, protection and sealing in general. It forms a continuous and solid, continuous, and protective coating without joints or overlaps. This polyurea once applied, expands between 5 and 7 times its volume. The pure polyurea TECNOCOAT P-2049 EX membrane is made up of two high reactive liquid components, isocyanates and amines, which are mixed together using spray equipment (TC2049)
Low viscosity polyurea membrane 100% pure for waterproofing and coating
The 100% pure polyurea TECNOCOAT P-2049 LV membrane was developed as a coating suitable for waterproofing, protection and sealing in general. The pure polyurea TECNOCOAT P-2049 LV membrane is made up of two high reactive liquid components, isocyanates and amines, which are mixed together using spray equipment (TC2049, to form an aromatic, continuous, without joints, high density, solid and elastic pure polyurea, for protecting the polyurethane foam TECNOFOAM (SPF).
Stretchable polyurea membrane 100% pure for waterproofing and coating (>600%)
The 100% pure and elastic polyurea TECNOCOAT P-2049 EL system was developed as a single coating suitable for waterproofing, protection and sealing, especially in elements with structural movements.The pure polyurea TECNOCOAT P-2049 EL membrane is made up of two high reactive liquid components, isocyanates and amines, which are mixed together using spray equipment. TECNOCAOT P-204 EL is an aromatic high density and elasticity pure polyurea and excellent elasticity.
100% pure polyurea membrane for waterproofing and coating
The cold polyurea TECNOCOAT CP-2049 is a two component polyurea, that once applied, forms a continuous, solid, 100% waterproof membrane without joints or overlaps and completely adhered to support. Suitable for waterproofing, protection and sealing in general. Due to its cold and manual application, is ideal too for repair or recoating on top of our polyurea membranes range, once these are already catalyzed.