About
Products
Systems
Price list
Services
Construction projects
Contacts
Call us
PRIMER T
One component, impregnation alcoholic solution containing adhesion promoters.
Is an alcohol-based impregnation, colorless, without yellowing. Specially designed to increase adhesion on non-porous substrates, for uses under DESMOPOL T, transparent and aliphatic polyurethane membrane.
Use
-
specially designed to increase adhesion of transparent and aliphatic polyurethane membrane DESMOPOL T.
-
to apply on non-porous substrates such as vitrified tiles, ceramic, marble ...
-
on other supports than those specified, please make a test or consult our technical department.
NOTE: call our technical department about the application to other supports or situations
| dry time at 23ºC | 10~15 min |
| application method | use a wet rag |
| specific weight at 23ºC | 0,83 g/cm³ |
| viscosity at 23ºC | 40 cps |
| VOC(volatile organic compounds) | 823,1 g/l |
| flashpoint | 42ºC |
GENERAL FEATURES
- Apply in thin layers using a wet rag. Approx. consumption 60 g/m²
- No dilution with any kind of solvent.
- In different supports, specified, do a previous test.
- It requires smooth, clean and dry surface without residual moisture
- Drying time: 10-15 minutes, before applying the membrane aliphatic and transparent DESMOPOL T.
- Do not apply on substrates with existing moisture/ humidity or contact with water from the inside of the support (possible phreatic water, condensation, leaks ...).
PACKAGING
Metal tins of 4 kg.
SHELF LIFE
12 months for each product at temperatures between 5° C and 35° C, provided it is stored in a dry place. Once the tin has been opened, the product must be used immediately.
HANDLING AND TRANSPORT
These safety recommendations for handling, are necessary for the implementation process as well as in the pre and post, on exposure to the loading machinery.
- Respiratory Protection: When handling or spraying use an air-purifying respirator.
- Skin protection: Use rubber gloves, remove immediately after contamination. Wear clean body-covering. Wash thoroughly with soap and water after work and before eating, drinking or smoking.
- Eye / Face: Wear safety goggles to prevent splashing and exposure to particles in the air.
- Waste: Waste generation should be avoided or minimized. Incinerate under controlled conditions in accordance with local laws and national regulations.
Anyway, consult the material and safety data sheet of the product(MSDS) or contact our technical department.