Primer
We have developed a range of different resins to maximize grip in any substrate, porous or non-porous, and under different conditions of temperature and humidity as well as to facilitate the implementation of our membranes and floors.Two-component, 100% solids epoxy resin as a primer for damp conditions and fast tack-free time
PRIMER WET R is a free solvent resin, two-component low viscosity, applicable in a single layer, and fast tack-free time. It is specially designed to increase adherence to waterproofing systems based on continuous membranes, TECNOCOAT P-2049 pure polyurea membrane, and DESMOPOL single polyurethane membrane, even on concrete or mortar substrates with high residual moisture.
Two-component, 100% solids epoxy resin as a primer (for damp conditions)
PRIMER WET is a free solvent resin, two-component, low viscosity, applicable in a single layer. It is specially designed to increase adherence to waterproofing systems based on continuous membranes, TECNOCOAT P-2049 pure polyurea membrane, and DESMOPOL single polyurethane membrane, even on concrete or mortar substrates with high residual moisture.
Two component, water based epoxy resin as a primer
PRIMER EPw-1070, is an epoxy water-based resin, without solvents, specially designed to increase adherence of our liquid waterproofing systems DESMOPOL and TECNOCOAT P-2049; also for the flooring systems TECNOFLOOR. PRIMER EPw-1070 has 0% volatile chemicals.
Two-component, 100 % solids, epoxy resin as a primer
It’s a two-component, 100% solid content, epoxy resin-based. Specially designed as a primer to increase adherence and repair substrates on mortar, concrete or ceramic tiles for flooring and waterproofing systems TECNOFLOOR, TECNOTOP, TECNOCOAT, and DESMOPOL.
Two-component, 100% solids polyurethane resin as a primer (for low temperatures)
PRIMER PUc-1050, is a two-component, low viscosity, 100% solids polyurethane resin. It is specially designed to increase the adhesion of waterproofing systems, improve the rough floor in structural surfaces such as concrete or mortar, in waterproofing systems applications as TECNOCOAT pure polyurea or polyurethane DESMOPOL, and always in low ambient temperature conditions.
Two-component, 100% solids, polyurethane resin as a primer
PRIMER PU-1050 is a two-component, low viscosity 100% solid resin. It has been specifically designed to increase bonding and improve the surface leveling prior to the pure polyurea TECNOCOAT or DESMOPOL systems. It can be applied on porous substrates such as concrete or mortar
Two component, 100 % solids, epoxy resin as a primer
It’s a two component primer, epoxy resin based 100% solids, to use as a primer, to increase adherence of TECNOCOAT and DESMOPOL waterproofing liquid systems, in applications on metal surfaces.
Single component, solvent based, polyurethane resin as a primer
PRIMER PU-1000 is a single component, low viscosity, high solids content polyurethane resin. It has been specifically designed to increase bonding and improve the surface leveling of the substrates prior to the application of the DESMOPOL or TECNOCOAT.