Special solvent for dilution and cleaning
DESMOSOLVENT is a diluent for DESMOPOL polyurethane membrane and TECNOTOP aliphatic resin topcoat. The dilution is only recommended by spray application (“airless equipment”). Also could be used for tools and equipment cleaning.
recommended as a diluent for the polyurethane membrane DESMOPOL, and the TECNOTOP 2C/2CP, aliphatic resins for spray applications(by roll or brush is not necessary)
this is recommended to use for cleaning equipment and tools.
|density at 23ºC||0,869 ± 0,020 kg / l|
Metal tins of 25l.
12 months at a temperature of 5 ºC to 25 ºC in dry sites.
These safety recommendations for handling, are necessary for the implementation process as well as in the pre and post, on exposure to the loading machinery.
- Respiratory Protection: When handling or spraying use an air-purifying respirator.
- Skin protection: Use rubber gloves, remove immediately after contamination. Wear clean body-covering. Wash thoroughly with soap and water after work and before eating, drinking or smoking.
- Eye / Face: Wear safety goggles to prevent splashing and exposure to particles in the air.
- Waste: Waste generation should be avoided or minimized. Incinerate under controlled conditions in accordance with local laws and national regulations.
Anyway, consult the material and safety data sheet (MSDS) of the product.
|density at 23ºC ISO 1675||0,869 ±0,020 kg /l|
|performance||±5% on DESMOPOL and TECNOTOP|
|VOC (supplied)||869.9 g /l|