DESMOTHIX
Thixotrope additive for DESMOPOL membrane
DESMOTHIX it’s a polymeric thickener, it has been developed especially as a liquid additive for the polyurethane liquid membrane DESMOPOL, to use on vertical or sloped surfaces, giving a thixotropic properties.
Use
- Additive for the membrane DESMOPOL, to apply on vertical or sloped surfaces
- Prevent fall of the membrane due to its drying time
NOTE: call our technical department about the application to other supports or situations
maximum consumption | 1 l per 25 kg of DESMOPOL |
APPLICATION METHOD
- Add DESMOTHIX in the proportion defined (maximum 1 liter per 25 kg of DESMOPOL) in the drum of the membrane
- mixing continuously until a homogeneous product
- apply the mixture by short hair roll
- if the environmental temperature is lower than 5ª, heat before mix with DESMOPOL
SHELF LIFE
12 months at temperatures between 5° C and 35° C, provided it is stored in a dry place
PACKAGING
Metal tins of 1l.
HANDLING
These safety recommendations for handling, are necessary for the implementation process as well as in the pre-and post, on exposure to the loading machinery.
- Respiratory Protection: When handling or spraying use an air-purifying respirator.
- Skin protection: Use rubber gloves, remove immediately after contamination. Wear clean body-covering. Wash thoroughly with soap and water after work and before eating, drinking or smoking.
- Eye / Face: Wear safety goggles to prevent splashing and exposure to particles in air.
- Waste generation should be avoided or minimized. Incinerate under controlled conditions in accordance with local laws and national regulations.
Anyway, consult the material and safety data sheet of the product (MSDS), or contact our technical department.
PROPERTIES
PROPERTIES |
VALUES |
Density at 23 ºC ISO 1675 |
±0,9 g/cm³ |
Solids content ISO 1768 |
±26% |
Color |
yellowish |
Viscosity at 23 ºC ISO 2555 | 20~50 cps |